Offshore Crane Operator
Company: Gulf Island Fabrication
Location: Houma
Posted on: June 25, 2022
|
|
Job Description:
Description:
Offshore Crane Operator
Main Purpose
The Offshore Crane Operator is primarily responsible for the
operation of main and deck cranes within the designed (SWL) loads
in accordance with the de-rating tables applicable to existing
weather and sea state condition.
Essential Functions
--- Conducting all crane operations in a safe manner
--- Completing and documenting all required inspections for the
equipment that they operate. Any discrepancies shall be recorded
and reported.
--- Ensuring that the Crane is maintained in accordance with the
most current edition of API RP 2D incorporated by reference as per
30 CFR 250.198 and that all required documentation is maintained at
the facility
--- Ensuring that the equipment is used in accordance with the
manufacturer's instructions
--- Confirming all safety devices are in good working order and
maintained in accordance with local requirements
--- Carrying out function tests prior to each use
--- Pre-use inspections of the crane and boom
--- Participating in the planning, JSA and pre-lift safety meetings
of all lifting operations that require utilization of the crane
--- Verifying communication methods with the appointed signalman
prior to commencing the lifting operation
--- Verifying crane capacity in the given configuration, weather
conditions and any other limiting factors
--- Ensuring that any dynamic factors have been taken into
consideration and that the dynamic load charts have been checked to
verify that the lift is safe to proceed
--- Knowing the weight of the load, center of gravity and the path
of load, ensuring the landing area is clear of obstructions and has
suitable capacity to support the load
--- Ensuring that all personnel are clear of the load and that all
controls are in place prior to commencing the lift
--- Always operating the crane in a controlled manner with smooth
and careful motions
--- Checking for any expected helicopter operations and position
the crane in a safe position and exit the crane cab so the pilot
can see you prior to helicopter landing and takeoff
--- Properly cradling the crane boom under the following
conditions: severe weather, high winds, and periods of infrequent
use especially at night
--- Conforming to Diving Operations SimOps Plan whenever Diving
Operations are in progress
--- Ensuring that all synthetic slings and wire rope slings are
pre-use inspected and protected from any sharp edges and not
exposed to any risk of becoming damaged during the lift
.Requirements:
Physical Requirements
Standing- Is an essential job function/physical requirement.
Walking- Is an essential job function/physical requirement.
Turning, twisting, bending and stooping- These physical
requirements are essential job functions.
Pushing and Pulling- These physical requirements are essential job
functions.
Reaching, forward and reaching overhead- These are essential job
functions /physical requirements.
Climbing- Is an essential job function /physical requirement.
Balancing, fingering, feeling, talking hearing and seeing- These
are all considered normal physical duties/requirements and would be
needed /required to work in this industrial environment is a safe
and efficient manner
Lifting - employees must be able to lift up to 25-50 pounds and
occasionally 75-100 pounds.
Required Qualifications
--- TWIC card
--- Water Survival
--- PEC or Rig Pass (Safe Gulf)
--- Crane Operator Classification A as required by client
standards
PM21
PI183021369
Keywords: Gulf Island Fabrication, New Orleans , Offshore Crane Operator, Other , Houma, Louisiana
Click
here to apply!
|